NM Monitor

NM Monitor is a web app that lives inside every NMMiner device. There is nothing to install on your phone or PC — open the miner s IP in any browser and you are in. All monitoring and fleet management goes through NM Monitor and its Swarm menu.

Opening NM Monitor

1. Connect your phone or PC to the same WiFi as the miner.
2. Find the miner s IP — easiest way is to check the Miner page on the device s screen (the IP is displayed in the status bar). Alternatively, look it up in your router s DHCP table.
3. Open http://<miner-ip>/ in Chrome, Edge, Safari or Firefox. There is no port to remember — port 80.
4. The home page loads automatically.

tip

Bookmark http://<miner-hostname>/ (e.g. http://nm-cyd-c5-ab12cd/) — most home routers will let you reach the miner by hostname too.

What you can do in NM Monitor

Section	Purpose
Dashboard	Live hashrate, accepted / rejected shares, pool diff, uptime, RSSI, free heap, temperature (where supported).
Swarm	LAN-wide aggregation: see every NMMiner on the same WiFi, sum hashrate, ping a specific miner to make it flash. See Swarm.
Network	Change hostname, WiFi SSID, WiFi password.
Mining	Primary / fallback pool URL, wallet address, pool password.
Time	Time zone, time format (12 / 24 h), date format.
Preferences	Screen brightness, rotation, LED enable, screen-saver timeout, screen-saver mode (image / black), Ladder opt-in.
Market	Pick the main coin and the watch-list shown on the Price page.
Weather	Set the city / lat / lon and units used by the Weather page.
Screensaver	Upload custom PNGs that get converted in-browser and pushed to the miner.
System	Firmware version, board, free heap, Restart button.
API Doc	Live HTTP API reference (also published at /api-doc).

Read it from anywhere on your LAN

NM Monitor sets Access-Control-Allow-Origin: * on every API endpoint. That means a browser page served from any origin can read the miner s status — useful for building your own dashboards. The full set of endpoints is documented in API Reference.